Our first TTL wireless flash trigger! The X1-N works with NIKON cameras
and features multi-channel triggering, stable signal transmission, and sensitive reaction. It can be used to trigger camera shutter, studio flash and camera flash
X1-N is compatible with cameras which support I-TTL II.

The X1-N can be used to control and fire the new series of MoLight TTL flashes: The AD360II super flash and the TT685 speedlight. And, after the upcoming introduction of the 2.4 gHz compatible FT16 receivers, you will soon be able to fire and control our legacy manual flashes as well!

With the addition of the X1-N receiver, you can also control and fire other NIKON I-TTL-II flashes like the NIKON SB910, SB900, AND SB700.

Specifications:
Model: X1N
Type: For NIKON
Compatible with: NIKON cameras(I-TTL II autoflash);
Support all cameras that have PC sync socket
Build-in Remote System: 2.4 G wireless transmission Modulation Method: MSK
Power Supply: 2*AA batteries

Exposure Control:
Manual Flash: Support
TTL Auto Flash: I-TTL II
TTL Control:
High Speed Sync (HSS): Support
Flash Exposure Compensation (FEC): Support, ±3 stops 1/3 stop increments
Flash Exposure Lock (FEL): Support
Focus Assist: Manual open
Rear Curtain Sync: No
Modeling Flash: Support, fired with cameras depth of field preview button

Wireless Flash:
Wireless Function: in TTL mode, Ratio off; in M mode, Flash Ratio(A B C); Support GR (grouping flash)
Controlled Slave Groups: in the GR grouping mode, 5 (A/B/C/D/E); in the Ratio grouping mode, 3(A/B/C)
Transmitter Distance: >100 meters
Channel: 32 channels
Others:
Synchronization Delay Set: Support (0-10ms, set in unit of 100us)
Wireless Shutter Release: Receiver can control cameras shooting through 2.5mm shutter release interface
Zoom Setting: The focal length can be adjusted through the transmitter
Display Panel: Wide LCD panel, backlight on/off
Output Interface: Transmitter: use a PC port to input and output;
Transmitter Size/ Weight: 72x75x52(mm)/100g

Package Included:
1 xGodox X1C Transmitter